Table of Contents
Advertisement
5. After a minute, choose the ACC version in use at your site.
You are logged in to the Windows environment. The Avigilon Control Center Admin Tool
automatically starts up.
Note: If you are performing operating system recovery, the Avigilon Control Center Admin
Tool does not automatically start up. For more information about running the local ACC
installer, see
Proceed to activate the license for the Avigilon Control Center software on your Network Video Recorder.
Activating and Configuring ACC™ Software
For information about activating licenses, configuring sites, logging in to a site, and administering your
version of the Avigilon ACC software, see the following guides:
Avigilon ACC Initial System Setup and Workflow Guide
l
Avigilon ACC Client User Guide
l
These guides are available on the Avigilon website: avigilon.com/support-and-downloads.
Troubleshooting
Network Configuration
By default, the Network Video Recorder acquires an IP address on the network through DHCP. If you need
to set up the recorder to use a static IP address or any specific network configuration, see the Windows
Help and Support files for more information.
Checking System Health
You can check on the health of the system components in the Site Health in the ACC Client software. See
the Windows Help and Support files for more information.
Operating System Recovery By Avigilon Recovery Partition
If you need to recover the Windows operating system, the NVR4 Value includes an onboard Avigilon
recovery partition that is separate from the operating system partition. The advantage of using the Avigilon
recovery partition is that you do not need an internet connection.
Activating and Configuring ACC™ Software
Operating System Recovery By Avigilon Recovery Partition
below.
6
Advertisement
Table of Contents
