Insignia 9005 Assembly & Fitting Instructions page 6

VERY IMPORTANT
Have you got everything? If not please contact your supplying
dealer now. Remember NEVER
thing has arrived, been checked and is present. No replacement /
missing parts can obtained free of charge during or after build only
within the timescale permitted (48 hours after delivery) and always
BEFORE build.
GOT EVERYTHING AS YOU SHOULD?
GREAT NOW FOR BUILD PLEASE READ ON!
TO START.
Make sure you have a clear space, remember when finished and in
place you need access to check your build and able to pull the
shower out should you need to replace anything!
Taking the tray you need to level it in order the water runs cor-
rectly down the waste. Place the tray section on the position you
require it when fully built. Now using a sprit level carefully adjust
the feet underneath. When you are happy with the result and all
feet firmly connect to the floor move the bath out to a more as-
sessable working space.
Now secure the tray waste and seal in as would be normally under-
taken with a standard shower tray. Take note of where you need
to run the flexi waste first in relationship to the house waste.
Check now the pipe attached to the spigot coming from the waste
is tight and the clip firm.
For the latest fitting instructions please visit www.insigniarange.co.uk
11
book your tradesman until every-
For the latest fitting instructions please visit www.insigniarange.co.uk
Tray Feet
Check Levels both
Normal waste set up using
optional fitting kit
12