Advertisement
Quick Links
INSTALLATION MANUAL
ES003
ATTENTION INSTALLERS:
These instructions must be
left with the customer
www.insigniarange.com
CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!
WARRANTY REG NO: __________________________
To upgrade to a full 5 year warranty, visit https://www.insigniaoutlet.co.uk/extended-warranty.html Standard 24 month
warranty applies without the upgrade.
Last Modified 21/03/2018
www.insigniarange.co.uk
30 Day Technical Support:
(NOTE: This service is only available to customers from the day of delivery,
please have your supplier's details and your postcode to hand before calling)
Replacements Parts:
inside of your warranty contact:
www.insigniarange.co.uk/customerservice.aspx
Spares/Replacements Parts:
outside of your warranty
contact 0844 800 3069
01908 226545
Advertisement
Related Manuals for Insignia ES003
Summary of Contents for Insignia ES003
- Page 1 INSTALLATION MANUAL www.insigniarange.co.uk 30 Day Technical Support: 01908 226545 ES003 (NOTE: This service is only available to customers from the day of delivery, please have your supplier’s details and your postcode to hand before calling) Replacements Parts: inside of your warranty contact: www.insigniarange.co.uk/customerservice.aspx...
- Page 2 Last Modified 21/03/2018 Thank you for your recent purchase of an Insignia shower. Please read this booklet with great care to ensure you get the best out of your build and have a shower that will last for many years to come! Like everything, in order to obtain a first class product that will serve you well for many years, the effort and correctness put into the assembly will reflect in the quality of your finish.
- Page 3 www.insigniarange.com Last Modified 21/03/2018 TOTAL ELECTRICAL REQUIREMENTS Voltage Rating 220 -240AC Frequency Rating 50HZ Power Rating 2.8KW Your electrical contractor should understand ALL legal requirements of connection before undertaking any work or installation. UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF!!! Note for electrician. This product comes with 13 amp plug(s) fitted with an RCD unit. We leave it this way for you to connect this your own way due to continued additions to current regulations.
- Page 4 DURING BUILD, LIKE ALL SHOWERS CORRECT SEALING IS IMPERATIVE. If you are using Insignia’s RubberGum, please ensure the product does not come in contact with your silicone as this will cause the RubberGum to fail and will not adhere as intended.
-
Page 5: Table Of Contents
www.insigniarange.com Last Modified 21/03/2018 Contents Introduction Electrical Requirements Plumbing Requirements What’s In The Boxes? Screw Pack Contents Schematics Starting The Installation Electrical Connections Steam Generator Connections Sealing and Water Testing Control Panel Instructions Help Book Information Parts list... -
Page 6: What's In The Boxes
www.insigniarange.com Last Modified 21/03/2018 Whilst the next steps show you how to assemble your shower we want to make sure you have a correct build to ensure you get a trouble free shower. Therefore our advice is to follow the instructions and perform a dry run to ensure you are confident with the build and you understand fully how the unit is assembled. When we use the word “DRY RUN”... - Page 7 www.insigniarange.com Last Modified 21/03/2018 Tool Requirements None Supplied Scissors Stanley Blade Silicone Gun Spirit Level Tape Measure Philips Screwdriver Electric Drill Adhesive Requirements Bacteria Resistant Sanitary Silicone - (for vertical joints) RubberGum Plumbers Mait (for waste joints) Not Supplied Not Supplied Not Supplied Hardware Requirements A Steam Shower requires 3 x 1 Metre Braided Hose...
- Page 8 Small Washers Drill Piece VERY IMPORTANT Have you got everything? If not please contact the Insignia Support Line on 01908 226545. Remember NEVER book your tradesman until everything has arrived, been checked and is present. No replacement/missing parts can be obtained free of charge during or after the build. Any claims can only be within the timescale permitted (48...
- Page 9 www.insigniarange.com Last Modified 21/03/2018 Pressure Requirements from your house supply We recommend a bar pressure between 2.5 and 3.4 BAR. If you have a combi boiler system no problem should be experienced. If you have a gravity feed older type installation (hot water tank type usually less than 1 bar) you will almost certainly need a pump.
- Page 10 www.insigniarange.com Last Modified 21/03/2018...
- Page 11 www.insigniarange.com Last Modified 21/03/2018 TO START Make sure you have a clear space, remember when finished and in place you need access to check your build and able to pull the shower out for servicing or should you have the need to replace anything! Take the shower tub and remove all the protective wrapping and fit the waste.
- Page 12 www.insigniarange.com Last Modified 21/03/2018 Step 2 Place the back panel to the side glass ensuring that the side glass frame at its wide point is at the rear of the shower and wide black decorative paint is at the top. Align the back panel to lip on the side glass and once you are happy with the alignment, run a bead of silicone...
- Page 13 Last Modified 21/03/2018 Step 4 Now attach the front fixed panels using ST35 screws. (wider rail with the Insignia logo at the top) Step 5 Then screw the inner uprights into the top and bottom rails using the ST25 screws. To do this you will need to use the...
- Page 14 www.insigniarange.com Last Modified 21/03/2018 Step 6 Insert the corner uprights onto the outer front fixed glass panels as shown in the image Step 7 Now use the ST14 screws to secure into place...
- Page 15 RubberGum along the bottom of the frame. Then screw together using the ST14 screws. Step 9 Your Insignia shower should now like this.
- Page 16 www.insigniarange.com Last Modified 21/03/2018 Step 10 Align the roof with your shower walls and the bath tub and using the ST14 screws and SW9 washers fix the back walls to the roof by screwing upwards from the rear of the shower.
- Page 17 www.insigniarange.com Last Modified 21/03/2018 Accessory Installation Please Note Ensure all grey backing film on the rear of the glass panels are pierced through the existing glass holes with a knife to provide an efficient smooth fitting and location of the accessories. We recommend using a screwdriver on the smaller holes.
- Page 18 www.insigniarange.com Last Modified 21/03/2018 Wheels Fit the adjustable wheels to the top and bottom of the glass doors and ensure the wheels are at their lowest position and hang on the inner curved rails with the wheels facing the outside of the glass. Once all wheels are fitted and on the rails you can adjust the wheels by turning the plastic bolt clockwise in which in turn will pull the wheels towards the track ensuring a secure a tight fit.
- Page 19 www.insigniarange.com Last Modified 21/03/2018 Monsoon Head Attach the grey hose from your valve to the inner black tube using PTFE tape (please note this only needs to be hand tight. Over tightening will snap/damage the inner black tube)
- Page 20 Hand Shower Device output may differ from the image. Please refer to your outer chrome faceplate inside your Insignia shower as a reference point. IF YOUR DIAL DOES NOT CORRESPOND TO THE APPROPRIATE DEVICE: Turn on your water to the shower and note which output the water exits from then turn off the water and swap over the relevant hose.
- Page 21 www.insigniarange.com Last Modified 21/03/2018 Electric Box Connections Connect the cables below to the corresponding devices on the shower...
-
Page 22: Steam Generator Connections
www.insigniarange.com Last Modified 21/03/2018 Steam Generator Connections The steam generator has 3 connections. Steam Outlet: Connect the white insulated hose to the white steam pod within your shower. Make sure these are fitted in the correct position as they are only attached for transportation reasons only. - Page 23 www.insigniarange.com Last Modified 21/03/2018 Silicone Seal (vertical joints) RubberGum (horizontal joints) TESTING FOR WATER LEAKS LEAVE THE SHOWER 24 HOURS AFTER BUILD TO ALLOW SEALANT TO CURE AND ENSURE THE SHOWER IS AWAY FROM ITS FINAL POSITION TO ALLOW REAR VIEWING Ensure all connections are tight and sealed including the waste, body jets and steam outlet (model dependent) on your shower.
-
Page 24: Control Panel Instructions
www.insigniarange.com Last Modified 21/03/2018 Control Panel Instructions Button 6 Button 1 Press once to activate the Press to activate the steam. radio. Press again to activate the AUX mode. Button 2 Press to turn the panel on/off Button 7/9 This is the Volume control. Press the + to increase the Button 3 volume and press - to... - Page 25 www.insigniarange.com Last Modified 21/03/2018 Need Help? Then simply download the following "Help" advice booklet found at this link below. This contains many useful items such as is your parts warranty registered, advice on cleaning / servicing your shower cabin, fault finding and many more items. This is a MUST to read and not just "HELP". It saves time in nearly all cases, avoiding contact with ourselves as most answers are there for a ready fix! Simply visit: www.insigniarange.co.uk/help.aspx...
-
Page 26: Parts List
Last Modified 21/03/2018 Parts List Framework Internal Items Part Code Part Description Part Code Part Description SP273 Speaker ES003-13 Top Rail SP228 Speaker cover SP063 Monsoon Shower head ES003-14 Bottom rail SP280 Essential Control Panel SP048 Massage jet—2 open ends... - Page 27 All images are registered with ImageTraker Insignia™ is a registered trademark of Maclean International Ltd All images are subject to copyright. Images may not be used in any way shape or form with out written permission from Maclean International Ltd. Images are NOT permitted...