Skyjack SJIII 3220 Service Manual page 12

Operator's Responsibility for Maintenance
Know and understand the safety precautions before going on to next section.
• DO NOT use the aerial platform
without guardrails, locking pins
and the entry gate(s) in place.
• DO NOT use under influence
of alcohol or drugs.
• STUNT driving and horseplay are prohibited.
• DO NOT exceed the rated
capacity of the aerial platform.
• DO NOT distribute
unevenly.
• DO NOT operate if aerial plat-
form is not working properly
or if any parts are damaged or
worn.
• DO NOT leave aerial platform
unattended with key in key
switch.
• DO NOT position the aerial platform against
another object to steady the platform.
SKYJACK, Page 12
Safety Precautions (Continued)
load
Section 1 - Scheduled Maintenance
• DO NOT place materials on the guardrails
or materials that exceed the confines of the
guardrails unless approved by Skyjack.
Entering and exiting the aerial platform
should only be done using the three
points of contact.
• Use only equipped access openings.
• Enter and exit only when the aerial
platform is in the fully retracted
position.
• Do use three points of contact to enter and exit
the platform. Enter and exit the platform from
the ground only. Face the aerial platform when
entering or exiting the platform.
• Three points of contact means that two hands and
one foot or one hand and two feet are in contact
with the aerial platform or the ground at all times
during entering and exiting.
An operator should not use any aerial
platform that:
• does not appear to be working properly.
• has been damaged or appears to have worn or
missing parts.
• has alterations or modifications not approved
by the manufacturer.
• has safety devices which have been altered or
disabled.
• has been tagged or locked out for non-use or
repair.
Failure to avoid these hazards could
result in death or serious injury.
Jobsite Inspection
• Do not use in hazardous locations.
• Perform a thorough jobsite inspection prior to
operating the aerial platform, to identify potential
hazards in your work area.
• Be aware of moving equipment in the area. Take
appropriate actions to avoid collision.
SJIII 3220 SJIII 3226 SJIII 4620 SJIII 4626 SJIII 4632
WARNING
WARNING
SJIII DC Electric
157935