Skyjack SJIII 3220 Service Manual page 11

Section 1 - Scheduled Maintenance
Know and understand the safety precautions before going on to next section.
• DO NOT operate on surfaces not capable of
holding the weight of the aerial platform including
the rated load, e.g. covers, drains, and trenches.
• DO NOT operate an aerial
platform that has
scaffolding or other devices
mounted on it to increase
its size or work height. It is
prohibited.
• DO NOT exert side forces on
aerial platform while elevated.
• DO NOT use the aerial platform
as a crane. It is prohibited.
• DO NOT sit, stand or climb on
the guardrails. It is prohibited.
• DO NOT climb on scissor arm
assembly. It is prohibited.
• AVOID overhead obstructions.
Be aware of
obstructions or other possible
hazards around aerial platform
when lifting or driving.
SJIII DC Electric
SJIII 3220 SJIII 3226 SJIII 4620 SJIII 4626 SJIII 4632
157935
Safety Precautions (Continued)
ladders,
overhead
Operator's Responsibility for Maintenance
• AVOID crushing hazards. Be
aware of crushing hazards
when lifting or driving. Keep
all body parts inside the aerial
platform.
• DO NOT raise the aerial
platform while the
platform is on a truck, fork lift
or other device or vehicle.
• DO NOT lower the platform
unless the area below is clear
of personnel and obstructions.
• ENSURE that there are no
personnel or obstructions in
the path of travel, including
blind spots.
• BE AWARE of blind spots when operating the
aerial platform.
• DO NOT use with improperly
inflated/damaged tires
wheels. Refer to Section 2:
Wheel/Tire Assembly.
• ENSURE ALL tires are in good condition and lug
nuts are properly tightened.
• DO NOT alter or disable
limit switches or other safety
devices.
aerial
or
SKYJACK, Page 11