Troubleshooting - Milkotester Master Pro Operating Instructions Manual

CHAPTER EIGHT
8
Error message
Error 10
Empty Sensor
The sample
temperature is
high.
The temperature
of box is high
Error 11

Troubleshooting

Possible problem
/cause
Insufficient quantity
of the milk sample
sucked in the
system or air in the
sample
Sucked overheated
sample
Analyzer
temperature has
exceeded
acceptable at work.
Fault in sensor
47
Ultrasonic milk analyzers
Repair/remedy
- Check if there is no air
bubbles in the sample.
- Check if after starting
measurement, milk sample in
the sample holder
decreases. In other case –
there is damage in the
suction system.
- The sample temperature
exceeds the maximum
permissible sample's
temperature.
- ENABLE OPTION 'FAST
START' (see menu settings –
fast start)
- Needs replacement of the
sensor. Contact
- Milkotester Ltd for
- advice and assistance.
Operating Instructions Master Pro
Milkotester Ltd