Measuring Samples - Milkotester Master Pro Operating Instructions Manual

Milk analyzer MASTER has provided a cable suitable for this
purpose. To use this option, follow the procedure described below:
1.
Unplug the 12V DC power cable from the socket on the rear
panel of the unit and then from the electrical outlet.
2.
Connect the supplied power cord 12V DC to the Power-in
socket 12V DC socket on the rear panel of the unit and plug the
other end of the cable into the electrical lighter socket inside your
vehicle.
3.
The device will be turned on immediately. After starting the unit
goes into system check service menu and will be ready for
analyses in about 5 minutes.
NOTE:
If the unit does not start up after it is connected to the power source, check
the fuse inside the connector plugged into the electrical lighter socket.
After MILKOTESTER MASTER is turned ON from the POWER
switch, the display reads first:
Followed by:
You can choose among three types of milk at a time,
(upon user's request the device can be calibrated for any
other types of milk).

4.2 MEASURING SAMPLES

Milk Analyzer
MASTER
Please Wait
System prepare
>Cow Milk
Sheep Milk
UHT Milk
12:00
12
Ultrasonic milk analyzers
01/01/17
Operating Instructions Master Pro
Milkotester Ltd