Measurement Of Ph - Milkotester Master Pro Operating Instructions Manual

MENU > Settings
Choose Settings and press ENTER.
MENU > Settings > Set Fr. Point.
Choose Set Fr. point and press ENTER.
Use ↑↓ (Up and Down) arrows to choose a type of milk and press
ENTER. The following text appears on the display:
Set Fr. Point
0,540
Press ENTER
To Set

6.2. Measurement of pH

MENU > Settings > Set pH
(active only on request)
Set pH:
Set Fr. Point
Set pH
Set thermometer
Conductivity
--------------------------------
Cleaning cycles
Fast start
Set f. Point Cal.1
Set f. Point Cal.2
Set f. Point Cal.3
Use ↑↓ (Up and Down) arrows to enter the new
value and Press ENTER to confirm. After
dialing the last symbol press ENTER to confirm
the new value.
pH calibration
pH mode
34
Operating Instructions Master Pro
Milkotester Ltd
Ultrasonic milk analyzers