Table of Contents
Advertisement
CONNECTING TO EXTERNAL PRINTER
MILKOTESTER MASTER can be connected to an optional serial
printer for printing out the results. MILKOTESTER MASTER is set to work
only with printers supplied by Milkotester Ltd. We warn you that the unit is
not set to work with other types of printers.
1. To connect MILKOTESTER MASTER to the serial printer, follow
the steps below:
2. Connect the provided power-out 12V DC cable to the POWER
OUT 12 V (for printer) socket on the rear panel of MILKOTESTER
MASTER.
3. Plug the jack on the other end of the cable into the matching
socket on the back of the printer.
4. Connect the provided serial cable to printer to the Serial port to
printer on the rear panel of MILKOTESTER MASTER.
5. Connect the other end of the cable to the serial connector RS 232
on the back of the printer.
6. Turn ON the POWER switch on the right panel of the printer. The
printer is now ready for printing. From this moment on all
measured results will be automatically printed out.
54
Operating Instructions Master Pro
Milkotester Ltd
Ultrasonic milk analyzers
Advertisement
Table of Contents
Need help?
Do you have a question about the Master Pro and is the answer not in the manual?
Questions and answers