Measurement Of Ph - Milkotester MASTER LM2-P2 Operating Instructions Manual

ULTRASONIC PORTABLE MILK ANALYZER

MEASUREMENT OF pH

(active only on request)
The milk analyzer has two modes of work – manual and automatic.
They are selected from MENU > Options > pH mode
Choose pH mode and press ENTER.
Under the manual mode, the milk sample is put under the pH probe,
then you press the pH button and the measurement will last without
interruption (until the pH button is pressed again). In order to measure
pH the device must be in a working condition.
Measurement of pH is not possible when the device is in the following
mode:
In this mode the device is measuring all the other components.
To start measurement of pH press pH button. The milk analyzer now is
operating as a pH meter. The following text will appear on the display:
System Info
Language
Time and Date
pH mode
MEASURING...
Please Wait
pH result:
X.XX
25
www.milkotester.com