Handling The Inverter; Removing The Sun2000; Packing The Sun2000; Disposing Of The Sun2000 - Huawei SUN2000-30KTL-A User Manual

SUN2000-(30KTL-A, 33KTL, 40KTL)
User Manual

9.1 Removing the SUN2000

Before removing the SUN2000, disconnect both the AC and DC power supplies. For
processes of disconnecting the power supplies, see
powering off the SUN2000, wait at least 5 minutes before performing operations on it.
Perform the following operations to remove the SUN2000:
1.
2.
3.
4.

9.2 Packing the SUN2000




9.3 Disposing of the SUN2000

If the SUN2000 service life expires, dispose of it according to the local disposal rules for
electrical equipment waste.
Issue 04 (2016-06-20)
Disconnect all cables from the SUN2000, including RS485 communications cables, DC
input power cables, AC output power cables, and PGND cables.
(Optional) Open the anti-theft lock at the bottom of the SUN2000.
Remove the SUN2000 from the rear panel.
Remove the rear panel.
If the original packing materials are available, put the SUN2000 inside them and then
seal them by using adhesive tape.
If the original packing materials are unavailable, put the SUN2000 inside a suitable hard
carton and seal it properly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9

Handling the Inverter

6.2 Powering Off the
9 Handling the Inverter
SUN2000. After
91