Table of Contents
Advertisement
SUN2000-(30KTL-A, 33KTL, 40KTL)
User Manual
Figure 5-8 Stripping the SUN2000-33KTL AC output cable (including the ground cable)
Figure 5-9 Stripping the SUN2000-30KTL-A or SUN2000-40KTL AC output cable (excluding
the ground cable)
Figure 5-10 Stripping the SUN2000-30KTL-A or SUN2000-40KTL AC output cable (including
the ground cable)
Step 3 Insert the exposed core wires into the crimp area of the OT terminal and crimp them using
hydraulic pliers.
Step 4 Wrap the wire crimp area with heat shrink tubing or PVC insulation tape.
If heat shrink tubing is used, put it through the power cable and then crimp the OT terminal.
Step 5 Remove the locking cap from the AC OUTPUT waterproof cable connector at the inverter
bottom and remove the plug from the locking cap.
Issue 04 (2016-06-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
48
Advertisement
Table of Contents
