Handling The Inverter; Removing The Sun2000; Packing The Sun2000; Disposing Of The Sun2000 - Huawei SUN2000-50KTL-ZHM3 User Manual

SUN2000-(50KTL-ZHM3, 50KTL-M3)
User Manual

9.1 Removing the SUN2000

Before removing the SUN2000, disconnect both AC and DC connections.
Perform the following operations to remove the SUN2000:
1.
2.
3.

9.2 Packing the SUN2000

●
●

9.3 Disposing of the SUN2000

If the SUN2000 service life expires, dispose of it according to the local disposal
rules for electrical equipment waste.
Issue 03 (2022-08-30)
NO TICE
Disconnect all cables from the SUN2000, including RS485 communications
cables, DC input power cables, AC output power cables, and PGND cables.
Remove the SUN2000 from the mounting bracket.
Remove the mounting bracket.
If the original packing materials are available, put the SUN2000 inside them
and then seal them by using adhesive tape.
If the original packing materials are not available, put the SUN2000 inside a
suitable cardboard box and seal it properly.
Copyright © Huawei Technologies Co., Ltd.
9

Handling the Inverter

9 Handling the Inverter
77