Table of Contents
Advertisement
SUN2000-(30KTL-A, 33KTL, 40KTL)
User Manual
Figure 5-22 Measuring the DC input voltage
Before performing
Step 7 Insert the positive and negative connectors into the corresponding DC input terminals of the
SUN2000 until a click sound is heard, as shown in
After the positive and negative connectors are in position, the clearance between the DC
terminals and connectors should be less than or equal to 0.8 mm and the DC input cables
cannot be pulled out.
Issue 04 (2016-06-20)
Step
7, ensure that the DC SWITCH is OFF.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
Figure
5-23.
57
Advertisement
Table of Contents
