Huawei SUN2000-30KTL-A User Manual page 79

SUN2000-(30KTL-A, 33KTL, 40KTL)
User Manual
Step 5 Switch the user type (common user, advanced user, and special user) by tapping the user
name bar.
Figure 6-7 Switching between users



Step 6 Enter the password and tap Log In.
Step 7 After the successful login, the Quick Settings screen or Function Menu screen is displayed.


Issue 04 (2016-06-20)
The login password is the same as that for the inverter connected to the app and is used only when
the inverter connects to the app.
The initial password for Common User, Advanced User, and Special User is 00000a (The initial
password for SUN2000 V200R001C00SPC003 is 000001). Use the preset password upon initial
login. To ensure account security, change the password immediately after login.
During the login, if an incorrect password is entered for five consecutive times (the interval between
two consecutive invalid password entries is less than 2 minutes), the account will be locked for 10
minutes. The password consists of six digits.
If you log in to the app after the device connects to the app for the first time or factory defaults are
restored, the Quick Settings screen will be displayed on which you can set basic parameters. After
the settings take effect, you can enter the main menu screen and modify the parameters on the
Settings screen. By default, the inverter can be grid-tied and you do not have to set parameters.
You are advised to log in to the Quick Settings screen as an advanced user for parameter settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 System Commissioning
73