SUN2000-(30KTL-A, 33KTL, 40KTL)
User Manual
Procedure
Step 1 Remove an appropriate length of the insulation layer from the positive and negative power
cables using a wire stripper, as shown in
Figure 5-18 Stripped length
Step 2 Insert the exposed area of the positive and negative power cables into the metal terminals of
the positive and negative connectors respectively and crimp them using a crimping tool, as
shown in
pulled out by a force less than 400 N.
Figure 5-19 Crimping a metal terminal
Step 3 Insert the crimped positive and negative power cables into the corresponding positive and
negative connectors until a click sound is heard.
Issue 04 (2016-06-20)
Figure
5-19. Ensure that the cables are crimped tightly such that they cannot be
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
5-18.
5 Electrical Connections
55