Installation, Step By Step - AVM FRITZ!X PC Manual

1 Introduction

Installation, Step by Step

6
The configuration of the PBX can be defined using either the
F F F F F R R R R R ITZ!X PC Configur ITZ!X PC Configur ITZ!X PC Configur
ITZ!X PC Configur ITZ!X PC Configuration P
telephone.
This manual describes the configuration of the PBX using the FRITZ!X
PC configuration software. For information about configuring FRITZ!X
PC with your telephone, please see the PDF file CONFIG-
TELEPHON.PDF in the \:DOCS directory on the FRITZ!X PC CD-ROM.
This manual first describes installation, then configuration, and
finally, the operation of the PBX.
The four analog extensions (e.g. telephone and fax machine)
are ready for operation upon completion of the PBX installation.
To take advantage of all F F F F F R R R R R ITZ!X PC
including ISDN data transmission and the Internet, you must
install the F F F F F R R R R R ITZ!32 ITZ!32 ITZ!32 ITZ!32 ITZ!32 software package as well.
Take note of the following order:
1. Unpack your package. The section „Package Contents"
illustrates and explains the function of all sockets, plugs
and cables.
2. Install the hardware.
3. Install the CAPI Driver.
4. Install the F F F F F R R R R R ITZ!X PC Configur
Configure F F F F F R R R R R ITZ!X PC
5.
6. Install the F F F F F R R R R R ITZ!32
7. Install an AVM system driver.
Instructions about how to perform these steps are provided in
the following chapters.
ation P ation Pr r r r r o g r ation P o g r o g r
ation P o g ra m o g r
ITZ!X PC functions and features, ITZ!X PC ITZ!X PC
ITZ!X PC
ITZ!X PC Configur ITZ!X PC Configuration P ITZ!X PC Configur ITZ!X PC Configur
ITZ!X PC ITZ!X PC
ITZ!X PC ITZ!X PC
ITZ!32 ITZ!32 ITZ!32 ITZ!32 communications software.
a m a m
a m a m or via touch-tone
ation Pr r r r r ogr ation P ation P ation P ogram ogr ogr ogr am. am am am