AVM FRITZ!X PC Manual page 51

FRITZ!X PC After a Power Outage
No Acknowledgement Signal During Programming
When F F F F F R R R R R ITZ!X PC ITZ!X PC ITZ!X PC ITZ!X PC operation is resumed after a power outage, ITZ!X PC
the last settings saved will be active.
If the settings made to F F F F F R R R R R ITZ!X PC
will resume operation using its factory settings.
Only telephones with touch-tone dialing can be used to program
F F F F F R R R R R ITZ!X PC ITZ!X PC ITZ!X PC over the PBX. Programming can not be performed ITZ!X PC
ITZ!X PC
with pulse-dial telephones with pulse dialing.
Some terminal devices can be switched between pulse and touch-
tone dialing. Check your telephone or fax machine.
ITZ!X PC ITZ!X PC were not saved, F F F F F R R R R R ITZ!X PC ITZ!X PC
ITZ!X PC
7 Tips & Tricks
ITZ!X PC ITZ!X PC ITZ!X PC
ITZ!X PC
51