AVM FRITZ!X PC Manual page 17

5. A warning appears, informing you that Windows now can
install the hardware. Confirm with Next
6. The Add New Hardware Wizard now will copy the installation
files from the CD-ROM into a temporary directory. Once this
procedure has been completed, the log-in window of the set-
up program will appear. Click Next
at any time with the Cancel
7. Select the „Installation" option in the following window and
click Next Next Next Next. Next
8. In the next window enter the directory to which the CAPI
driver software is to be installed. The directory C:\IDRIVER
is suggested by default, but you are free to enter any other
preferred directory. Once your entries are complete, click
the Continue Continue Continue Continue Continue button.
9. In the next window, enter the serial connection (COM port)
to which the V.24 cable is attached. Confirm with Continue
The installation program now copies all files to the specified
directory. The driver will be entered in the registry so that
the CAPI Driver software is activated automatically whenever
Windows 95 is started.
10. After installation has been completed successfully, the
settings are displayed in an information window. Confirm
OK OK
with OK OK. OK
11. A window will tell you to re-start Windows 95. Confirm this
command by clicking Y Y Y Y Y es es es es es.
Once Windows 95 has been re-started, the Program Files line in
the Start menu shows a new directory with the title „AVM".
The Readme file in this directory contains current information about
the CAPI driver software. Use the „FRITZ!X PC Setup" program to
make any subsequent changes to the COM port.
Next Next
Next. Next
Next Next
Next. You can end installation Next
Cancel Cancel
Cancel button. Cancel
3 Software Installation
Continue Continue . Continue
Continue
17