Connection Of Analog Terminal Devices - AVM FRITZ!X PC Manual

Connection of Analog Terminal Devices

Note the F F F F F R R R R R ITZ!X PC ITZ!X PC ITZ!X PC
ITZ!X PC ITZ!X PC LEDs: the green „POWER" LED signalizes
that F F F F F R R R R R ITZ!X PC ITZ!X PC ITZ!X PC
ITZ!X PC ITZ!X PC is ready for operation.
FRITZ!X PC is now turned on and ready for operation. The FRITZ!X
PC PBX does not have a power switch.
Once installation has been completed, F F F F F R R R R R ITZ!X PC
by default with its factory settings. For information on how to
adapt F F F F F R R R R R ITZ!X PC ITZ!X PC ITZ!X PC ITZ!X PC ITZ!X PC to your own demands and needs, please see
Chapter 4 „FRITZ!X PC Configuration".
FRITZ!X PC's reaction to a power outage or to being disconnected
from the power supply is described in Chapter 7 „Tips & Tricks".
F F F F F R R R R R ITZ!X PC ITZ!X PC ITZ!X PC ITZ!X PC ITZ!X PC is certified according to the regulations of the
German Federal Office for Post and Telecommunications and
thus allows the connection of any analog telecommunications
devices which conform to the standards of approval or have been
granted general certification.
To connect analog devices (telephone, telefax machine, answe-
ring machine or modem) to F F F F F R R R R R ITZ!X PC
your telephone into the appropriate socket of an adapter (this
is not necessary if the telephone is equipped with a RJ12 socket).
The adapter's RJ12 plug then must be inserted into one of the
four extension sockets on F F F F F R R R R R ITZ!X PC
2 FRITZ!X PC PBX Installation
ITZ!X PC ITZ!X PC will operate ITZ!X PC
ITZ!X PC
ITZ!X PC ITZ!X PC
ITZ!X PC, insert the TAE plug of ITZ!X PC
ITZ!X PC. ITZ!X PC ITZ!X PC ITZ!X PC
15