Key Lock; Specifications - JTS UF-20S/5 Instruction Manual

3.10 Key lock

The receiver is provided with a key lock to prevent
inadvertent operation
– Activating the key lock –
1) Call up the lock function via the menu
item
f. Key Lock
Setup KeyLock
Lock ON
Lock OFF
2) Turn the knob PUSH /CONTROL to activate
the key lock (ON)
3) Press the button SETUP to save the setting
When a button is pressed, the following message
appears:
Press Set for 2 Sec.
to unlock keyPad
Note: When the key lock is activated and the menu
is deactivated, the symbol
– Deactivating the key lock –
1) Keep the button SETUP pressed for two
seconds until the menu
appears:
Setup KeyLock
Lock ON
Lock OFF
2) Turn the knob PUSH /CONTROL to select the
setting and press the button SETUP to
OFF
save it
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
:
Fig. 27
Fig. 28
appears on the display
Setup KeyLock
Fig. 29
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
®

4 Specifications

Carrier frequency range:
REMOSET frequency:
Audio frequency range: 50 – 18 000 Hz
Output level
XLR, bal :
6 3 mm jack, bal :
THD:
Dynamic range:
Ambient temperature: 0 – 40 °C
Power supply
UF-20R / 5:
UF-20S / 5:
Dimensions (W × H × D)
UF-20R / 5:
UF-20S / 5:
Weight:
UF-20R / 5:
UF-20S / 5:
Subject to technical modification
530 – 605 MHz
2 4 GHz
10 mV (Mic)
switchable to
100 mV (Line)
100 mV (Line)
< 0 5 %
> 108 dB
100 – 240 V, 50 – 60 Hz,
25 VA max
12 V (⎓) /1 A via power
supply unit provided
and connected to
100 – 240 V, 50 / 60 Hz
480 × 44 × 214 mm
212 × 44 × 214 mm
2 9 kg
1 4 kg
23