Drop Off Mode Drop - ALLIANCE BF3JGBJG403UN01 Original Instructions Manual

Programming Control
6. When oPL 3 appears in the display, press the START (enter)
keypad. The current OPL status will appear in the display.
on = Option Enabled
oFF = Option Disabled (factory default setting)
7. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to change the current status.
8. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.

Drop Off Mode droP

This option allows the owner to limit machine use to an attendant
without requiring vend. Refer to Drop-Off Mode for more details.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad until Prog appears in the display. Press the START
(enter) keypad, and AtS 1 will appear in the display.
3. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to scroll through the programmable options until
droP appears in the display.
4. When droP appears in the display, press the START (enter)
keypad. The current Drop Off Mode status will appear in the
display.
on = Option Enabled
oFF = Option Disabled (factory default setting)
5. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to change the current status.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Out of Order oUt
This option allows the owner to disable machine use by display-
ing an out of order message.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad until Prog appears in the display. Press the START
(enter) keypad, and AtS 1 will appear in the display.
3. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to scroll through the programmable options until oUt
appears in the display.
4. When oUt appears in the display, press the START (enter)
keypad. The current Out of Order status will appear in the dis-
play.
on = Option Enabled
oFF = Option Disabled (factory default setting)
©
Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
5. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypads to change the current status.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
94 Part No. 805405ENR5