Table of Contents
Advertisement
Chapter 1 The HiveAP Platform
P
RODUCT OVERVIEW
The HiveAP is a multi-channel wireless AP (access point). It is compatible with IEEE 802.11b/g (2.4 GHz) and IEEE
802.11a (5 GHz) standards and supports a variety of Wi-Fi (wireless fidelity) security protocols, including WPA (Wi-Fi
Protected Access) and WPA2.
You can see the hardware components on the HiveAP in
Figure 1 HiveAP Hardware Components
RP-SMA
Connector for
802.11a
Radio Antenna
Table 1
HiveAP Component Descriptions
Component
Fixed Dual-Band Antennas
Status LEDs
802.11a RP-SMA Connector
10
Fixed Dual-Band Antennas
Status LEDs
Mounting
Reset
Screw
Button
Power
10/100 Mbps
Connector
Power-over-
Ethernet Port
For Detachable Single-Band Antennas
Description
The two fixed omnidirectional dipole antennas can operate at either of
the two radio frequencies: 2.4 GHz (for IEEE 802.11b/g) and 5 GHz (for
IEEE 802.11a). For details, see
The status LEDs convey operational states for system power, and the LAN,
Access, and Mesh interfaces. For details, see
(For future use) You can connect a detachable single-band antenna to the
male 802.11a RP-SMA (reverse polarity-subminiature version A)
connector. Note that doing so disables the adjacent fixed antenna.
Figure
1. Each component is described in
Device
Console
Lock Slot
Port
"Antennas" on page
Table
1.
RP-SMA
Connector for
802.11b/g
Radio Antenna
14.
"Status LEDs" on page
13.
Aerohive
Advertisement
Table of Contents
