Configuring Route Health Injection; Understanding Rhi; Rhi Overview; Routing To Vip Addresses Without Rhi - Cisco catalyst 6500 series Configuration Note

Content switching module
Hide thumbs Also See for catalyst 6500 series:
Table of Contents

Advertisement

Configuring Route Health Injection

Router(config-slb-policy)# sticky-group 1
Router(config-slb-policy)# exit
Router(config-module-csm)# vserver vs_sticky_ck
Router(config-slb-vserver)# virtual 10.8.0.125 tcp 90
Router(config-slb-vserver)# slb-policy policy_sticky_ck
Router(config-slb-vserver)# inservice
Router(config-slb-vserver)# exit
Configuring Route Health Injection
These sections describe how to configure route health injection (RHI):

Understanding RHI

These sections describe the RHI:

RHI Overview

RHI allows the CSM to advertise the availability of a VIP address throughout the network. Multiple
CSM devices with identical VIP addresses and services can exist throughout the network. One CSM can
override the server load-balancing services over the other devices if the services are no longer available
on the other devices. One CSM also can provide the services because it is logically closer to the client
systems than other server load-balancing devices.
RHI is restricted to intranets because the CSM advertises the VIP address as a host route and most routers
Note
do not propagate the host-route information to the Internet.
To enable RHI, configure the CSM to do the following:
The MSFC periodically propagates the VIP address availability information that RHI provides.
Catalyst 6500 Series Content Switching Module Configuration Note
8-2
Understanding RHI, page 8-2
Configuring RHI for Virtual Servers, page 8-4
RHI Overview, page 8-2
Routing to VIP Addresses Without RHI, page 8-3
Routing to VIP Addresses with RHI, page 8-3
Understanding How the CSM Determines VIP Availability, page 8-3
Understanding Propagation of VIP Availability Information, page 8-4
Probe real servers and identify available virtual servers and VIP addresses
Advertise accurate VIP address availability information to the MSFC whenever a change occurs
Note
On power-up with RHI enabled, the CSM sends a message to the MSFC as each VIP address
becomes available.
Chapter 8
Configuring Additional Features and Options
OL-4612-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 6000 series

Table of Contents