Cisco catalyst 6500 series Configuration Note page 101

Chapter 8 Configuring Additional Features and Options
Command
Step 6
Router(config-slb-vserver)#
dns-policy [group group-id ]
[netmask ip-netmask ]
Step 7
Router(config-slb-vserver)#
inservice
Step 8
Router(config-module-csm)#
serverfarm GSLBFARM dns-vip
Step 9
Router(config-slb-sfarm)#
predictor hash address source
Step 10
Router(config-module-csm)#
real ip-addres
Step 11
Router(config-slb-real)#
inservice
Step 12
Router(config-module-csm)#
map dns-map-name dns
Step 13
Router(config-dns-map)# match
protocol dns domain name
Step 14
Router(config-module-csm)#
policy policy name
Step 15
Router(config-slb-policy)#
dns map map_name
Step 16
Router(config-slb-policy)#
serverfarm primary-serverfarm
[backup sorry-serverfarm
[sticky]]
Step 17
Router(config-module-csm)#
vserver virtserver-name
Step 18
Router(config-slb-vserver)#
virtual ip-address [ ip-mask ]
protocol port-number [service
ftp]
Step 19
Router(config-slb-vserver)#
serverfarm serverfarm-name
Step 20
Router(config-slb-vserver)#
inservice
Step 21
Router(config-module-csm)#
vserver virtserver-name
Step 22
Router(config-slb-vserver)#
virtual ip-address [ ip-mask ]
protocol port-number [service
ftp]
Step 23
Router(config-slb-vserver)#
serverfarm serverfarm-name
Step 24
Router(config-slb-vserver)#
inservice
OL-4612-01
Purpose
Ensures that connections from the same client use the same server
farm.
Enables the virtual server for GSLB.
Creates and names the GSLBFARM server farm (actually a
forwarding policy) and enters server farm configuration mode.
Configures the hash address source for the load-balancing
predictor for the server farm.
Identifies the alias IP address of the real server and enters real
server configuration submode.
Enables the virtual server for load balancing.
Configures a DNS map.
Adds a DNS name to the DNS map.
Configures a policy.
Adds the DNS map attribute to the policy
Associate the server farm with the policy.
Configures a virtual server on CSM 2, and enters the virtual
server submode.
Configures the virtual server attributes.
Associates a server farm with the virtual server.
Enables the virtual server for load balancing.
Configures a virtual server on CSM 3, and enters the virtual
server submode.
Configures the virtual server attributes.
Associates a server farm with the virtual server.
Enables the virtual server for load balancing.
Catalyst 6500 Series Content Switching Module Configuration Note
Configuring Global Server Load Balancing
8-11