Cisco catalyst 6500 series Configuration Note page 96

Content switching module
Hide thumbs Also See for catalyst 6500 series:
Table of Contents

Advertisement

Chapter 8
Configuring Additional Features and Options
Environmental Variables
Default:0
Valid values:Integer (0 to 1)
Description:
Whether the CSM would reply to ARP for out-of-service vserver
Name:ADVERTISE_RHI_FREQ
Rights:RW
Value:10
Default:10
Valid values:Integer (1 to 65535)
Description:
The frequency in second(s) the CSM will check for RHI updates
Name:AGGREGATE_BACKUP_SF_STATE_TO_VS
Rights:RW
Value:0
Default:0
Valid values:Integer (0 to 1)
Description:
Whether to include the operational state of a backup serverfarm into the state of a
virtual server
Name:DEST_UNREACHABLE_MASK
Rights:RW
Value:0xffff
Default:65535
Valid values:Integer (0 to 65535)
Description:
Bitmask defining which ICMP destination unreachable codes are to be forwarded
Name:FT_FLOW_REFRESH_INT
Rights:RW
Value:60
Default:60
Valid values:Integer (1 to 65535)
Description:
FT slowpath flow refresh interval in seconds
Name:GSLB_LICENSE_KEY
Rights:RW
Value:(no valid license)
Default:(no valid license)
Valid values:String (1 to 63 chars)
Description:
License key string to enable GSLB feature
Name:HTTP_CASE_SENSITIVE_MATCHING
Rights:RW
Value:1
Default:1
Valid values:Integer (0 to 1)
Description:
Whether the URL (Cookie, Header) matching and sticky to be case sensitive
Name:MAX_PARSE_LEN_MULTIPLIER
Rights:RW
Value:1
Default:1
Valid values:Integer (1 to 16)
Description:
Multiply the configured max-parse-len by this amount
Name:NAT_CLIENT_HASH_SOURCE_PORT
Rights:RW
Value:0
Default:0
Valid values:Integer (0 to 1)
Description:
Whether to use the source port to pick client NAT IP address
Name:ROUTE_UNKNOWN_FLOW_PKTS
Rights:RW
Value:0
Catalyst 6500 Series Content Switching Module Configuration Note
8-6
OL-4612-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 6000 series

Table of Contents