Cisco catalyst 6500 series Configuration Note page 189

Appendix B Troubleshooting and System Messages
Error Message CSM_SLB-4-ERRPARSING Module [dec] configuration warning
SLB-REGEX: Syntactiv error in regular expression <x>.
SLB-REGEX: Parse error in regular expression <x>.
Explanation
expression matching.
Recommended Action
Error Message CSM_SLB-4-INVALIDID Module [dec] invalid ID
CSM_SLB-4-DUPLICATEID Module [dec] duplicate ID
Explanation
another module.
Recommended Action
appearing.
Error Message CSM_SLB-4-PROBECONFIG Module [dec] probe configuration error
Explanation
Recommended Action
Error Message CSM_SLB-4-REGEXMEM Module [dec] regular expression memory error
SLB-LCSC: Error detected while downloading URL configuration for vserver %s.
SLB-LCSC: Error detected while downloading COOKIE policy map for vserver <x>.
SLB-LCSC: Error detected while downloading COOKIE <x> for vserver <x>.
SLB-LCSC: There was an error downloading the configuration to hardware
SLB-LCSC: due to insufficient memory. Use the 'show ip slb memory'
SLB-LCSC: command to gather information about memory usage.
Explanation
expressions. The CSM has a limited amount of space to compute the matching strings. Currently,
the limit of 10 keywords (for example, "name*") are allowed per virtual server.
Recommended Action
Error Message CSM_SLB-4-TOPOLOGY Module [dec] warning
Explanation
Recommended Action
CSMs located in the network.
Error Message CSM_SLB-4-VERWILDCARD Received CSM-SLB module version wildcard on slot
Explanation
work around the image version mismatch condition described in the previous error message.
Recommended Action
OL-4612-01
These are the syntax error-checking messages for the URL, cookie, or header regular
Check the input matching strings.
These are error-checking messages between two modules when one module is calling
Check errors at the CLI level, which should prevent these errors from
The CSM does not have enough memory to support the specified probe configuration.
Remove some of the probes from the server farm.
These errors may occur if you configured complex URL, cookie, or header matching
Combine (or remove) the expression strings to work around this problem.
The CSM is detecting a "bridge loop" in the network.
Check the bridging device and the bridge-mode configurations of multiple
The CSM sends this message when you enter a debug command on the CSM console to
This error is a debug condition only.
Catalyst 6500 Series Content Switching Module Configuration Note
System Messages
B-3