Cisco catalyst 6500 series Configuration Note page 11

Preface
This preface describes who should read the Catalyst 6500 Series Content Switching Module Installation
and Configuration Note, how it is organized, and its document conventions.
Except where specifically differentiated, the term "Catalyst 6500 series switches" includes both Catalyst
Note
6500 series and Catalyst 6000 series switches.
This publication does not contain the instructions to install the Catalyst 6500 series switch chassis. For
information on installing the switch chassis, refer to the Catalyst 6500 Series Switch Installation Guide.
Note For translations of the warnings in this publication, see the
Audience
Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS3260) should install,
replace, or service the equipment described in this publication.
Organization
This publication is organized as follows:
Chapter Title
Chapter 1 Product Overview
Chapter 2 Networking with the Content Switching Module
Chapter 3 Getting Started
Chapter 4 Configuring VLANs
Chapter 5 Configuring Real Servers and Server Farms
Chapter 6 Configuring Virtual Servers, Maps, and Policies
OL-4612-01
"Safety Overview" section on page
Description
Presents an overview of the Catalyst 6500 series Content
Switching Module (CSM).
Describes how the CSM operates on a network.
Provides quick start guide to content switching on the
CSM.
Describes how to set up client and server VLANs for the
CSM.
Describes how to configure load balancing on the CSM.
Describes how to configure health monitoring on the CSM.
Catalyst 6500 Series Content Switching Module Configuration Note
xiv.
xi