Table of Contents
Advertisement
Chapter 6
CLI – Layer 2
The syntax for this command is:
nvram initialize [switch|all]
switch
all
Output Example:
P330-N# nvram initialize
This command will force a factory default and switch-over to
the master module and disconnect your telnet session.
Do you want to continue (y/n) [n]? y
Connection closed by foreign host.
host%
rmon history
Use the rmon history command to create an RMON history entry.
The syntax for this command is:
rmon history <history index> [<module>[</port>]] interval
<interval> buckets <number of buckets> owner <owner name>
history_index
module/port
interval
number of
buckets
owner name
Output Example:
P330-N# rmon history 1026 1026 3/2 30 buckets 20 owner amir
history 1026 was created successfully
126
Resets all the switching level parameters (Layer 2 only) throughout
the stack
Resets all parameters including licenses and routing parameters of
the Layer 3 switches present in the stack
This is the history index number of this entry (it is advisable to
use the same interface number as your history index number).
The switch number/the port number.
The interval between 2 samples.
The number of buckets defined.
The owner name string.
Avaya P332MF User's Guide
Advertisement
Table of Contents
