Avaya P332MF User Manual page 90

Chapter 6 CLI – Layer 2
show tftp download/upload status
Use the show tftp download status and show tftp upload status
commands to display the status of the current TFTP configuration file copy process
into/from the device.
The syntax for this command is:
show tftp {download|upload} status [<mod_num>]
Output Example:
P330-N> show tftp upload status 1
Module
Source file
Destination file : c:\conf.cfg
Host
Running state
Failure display
Last warning
show tftp download software status
Use the show tftp download software status commands to display the
status of the current TFTP Device Manager S/W (Embedded Web) download
process into the device.
The syntax for this command is:
show tftp download software status [<mod_num>]
Output Example:
P330-1(super)# show tftp download software status
Module #1
===========
Module
Source file
Destination file : EW_Archive
Host
Running state
Failure display
Last warning
74
: 1
: stack-config
: 149.49.36.200
: Executing
: (null)
: No-warning
: 1
: d:\p340sw\gt-ml\3.5.18\p340.web
: 149.49.70.61
: Writing ...
: (null)
: No-warning
Avaya P332MF User's Guide