L'INDICATORE DI DIREZIONE DESTRO O SINISTRO NON FUNZIONA
1.
Turn indicator
•
Left hand turn indicator:
•
Connect Tester (20 V DC) to connector of light bulb coupling, as follows:
•
Terminal (+) of Tester
•
Terminal (-) of Tester
•
Turn key "on".
•
Operate switch to activate left turn indicators.
•
Right hand turn indicator:
•
Connect Tester (20 V DC) to connector of light bulb coupling, as follows:
•
Terminal (+) of Tester
•
Terminal (-) of Tester
•
Turn key "on".
•
Operate switch to activate right turn indicators.
•
Power measured must be > 12V in both cases.
OK
Circuit is in working order.
S I G N A L L I N G S Y S T E M
S I G N A L L I N G S Y S T E M
Purple cable (1).
Chassis grounding (2).
Green cable (3).
Chassis grounding (2).
•
Wiring between left hand switch and light bulb
coupling connector is interrupted.
•
Resume connection.
•
See "Wiring diagram" (P.8).
NO
42
Tester (DC 20 V)
S
2
1
Tester (DC 20 V)
3
2
F. 42
F. 43