Lighting System; The Entire Lighting System Does Not Work - Malaguti X3Motard Workshop Manual

THE ENTIRE LIGHTING SYSTEM DOES NOT WORK

Check:
1. Fuse, 15 A
2. Battery
3. Key switch
4. Light relay
5. Connection to lighting system
1. Fuse, 15 A
• Remove relative fuse.
• Connect Tester (Ω) to fuse.
• Check continuity of fuse.
OK
2. Batteria
• Check condition of battery.
• Connect Tester (V) as follows:
• Terminal (+) of Tester
• Terminal (-) of Tester
• Minimum voltage: 12.5 V.
• Density of electrolytic solution: 1280 g/dm
• Level of electrolytic solution.
OK
L I G H T I N G S Y S T E M L I G H T I N G S Y S T E M
• Eliminate short-circuit.
• Replace fuse.
Battery positive (1).
Battery negative (2).
.
3
• Clean terminals.
• Top up with distilled water.
• Recharge or replace battery.
NO
NO
30
Tester (Ω)
1 2
1
2
F. 25
F. 26