Panasonic CF-T2 Series Reference Manual page 65

SD Memory Card/MultiMedia Card
5
Select [OK].
Operation differs depending on the setting in step
If you add the check mark for [Use the SD card when starting the computer] or [Use when
starting the computer] in step
Up to two SD memory cards can be registered for a single computer. The Supervisor
Password must be set to register.
If the Supervisor Password has been set
Enter the Supervisor Password, then select [OK].
If the Supervisor Password has not been set
Follow the on-screen instructions to set the Supervisor Password.
1
Enter the Supervisor Password, then press Tab .
2
Reenter the Supervisor Password entered in step
3
Select [Yes] on the confirmation screen.
4
Restart the computer.
[Supervisor Password] and [Password on boot] will be set to enable.
4
.
65
4
.
1
, then select [OK].