Panasonic CF-T2 Series Reference Manual page 42

Battery Power
When the Remaining Battery Charge Becomes Low
The following is factory default setting.
When remaining battery capacity falls to
10%
[Low battery alarm]
Displays a message indicating the low
battery level.
Charge your battery.
Connect the AC adaptor immediately. If
you do not have the AC adaptor with you,
exit any programs currently running, then
exit Windows, and confirm that the power
indicator is off.
If you have a fully charged spare battery,
turn off the computer, replace the battery,
and turn the computer on again.
Do not replace the battery pack while the
computer is in standby mode.
Above settings can be changed.
1
Display [Alarms] screen.
Windows XP
Select [start] - [Control Panel] - [Performance and Maintenance] - [Power
Options] - [Alarms].
Windows 2000
Select [Start] - [Settings] - [Control Panel] - [Power Options] - [Alarms].
When remaining battery capacity falls to 5%
[Critical battery alarm]
Displays a message indicating the low
battery level.
The computer will enter standby or
hibernation mode.
Windows XP
Hibernation mode
Windows 2000
Standby mode
Connect the AC adaptor before starting up
the computer next time.
If the computer starts up or resumes
while the AC adaptor is not connected,
Windows may not operate properly or
alarm operations may not work properly.
42