Panasonic CF-T2 Series Reference Manual page 44

Hide thumbs Also See for CF-T2 Series:
Table of Contents

Advertisement

Battery Power
Replacing the Battery Pack
3
At the confirmation message, select [Yes] and press Enter .
Once the battery indicator turns green, the battery pack will be completely
discharged. It takes approximately 3 hours until the power automatically goes
off through the complete discharge of the battery from the fully charged state.
3
Allow the battery pack to charge until the battery indicator turns
green.
Charging Time: Approximately 3 hours.
The battery pack is a consumable item and therefore will require replacement (CF-
VZSU24U/CF-VZSU24AU). When the charge provided by your battery pack is supplied for
only a short period of time, even after fully charging according to the instructions, it may be
time to replace your battery pack.
CAUTION
Do not touch the terminals on the battery pack and the computer. The battery pack
may no longer function properly if the contacts are dirty or damaged. Also, the
computer may not operate properly.
The battery pack is not charged when it is first purchased. Be sure to charge it before
using it for the first time. When the AC adaptor is connected to the computer,
charging begins automatically.
Use only the specified battery pack (CF-VZSU24U/CF-VZSU24AU) with your
computer.
In the standby mode, do not remove/change the battery pack. Removing the pack in
the standby mode will erase your data and may damage the computer.
1
Power off your computer.
( ⇒ Operating Instructions "Starting Up/Shutting Down")
Do not shut down using the standby function.
2
Turn your computer over and remove the battery pack.
Remove the battery pack while sliding the latches (A) inward.
For U.S.A. and Canada
Descriptions are given using illustrations not featuring the hand strap for conve-
nience of explanation.
44

Advertisement

Table of Contents
loading

Table of Contents