Touchscreen (Only For Models With Touchscreen); Sd Card Setup (Sd Memory Card Security Function) - Panasonic CF-T2 Series Reference Manual

Dealing with Problems (Advanced)
Touch Pad
Unable to input using the touch pad

Touchscreen (only for models with touchscreen)

Unable to input by touching the display
Sound
The sound is not heard
Volume does not change when
Fn + F5 or Fn + F6 is pressed
The audio is distorted
When starting Sound Recorder, it
displays the message: "There was an
error updating the registry"

SD Card Setup (SD memory card security function)

Cannot use SD memory card security
function
Has the Setup Utility been used to set [Touch Pad] to [Enable]?
When external mouse drivers are installed (e.g., IntelliMouse), the touch pad
may not be used.
Has the touch pad driver been properly installed?
When mouse drivers are installed (e.g., Intellimouse), the touchscreen is
unable to be used.
Has the touchscreen driver been properly installed?
It is necessary to perform [Calibration] to point correctly with the stylus included
with the computer.
Try changing the mute by pressing Fn + F4 or Fn + F6 .
If the Windows sound function is not active, the volume will not change even if
is displayed.
Audio distortion may occur when operations are performed by pressing Fn in
combination with another key. Stop playing and start again.
Sound Recorder displays this error message when started by a user with a
limited account if the user's language setting is different to that of the user with
administrator authority which last started it. This will not affect the operation of
the computer.
The SD memory card must be set up in order to use the security function
( page 56).
110