Panasonic CF-T2 Series Reference Manual page 94

Setup Utility
Boot Menu
*1
Floppy Drive
Hard Disk Drive
*1
USB CD Drive
*2
LAN
*1
This is displayed even if a floppy disk drive or CD drive is not connected.
The following drive can be used for startup (recommended).
Panasonic USB floppy disk drive:CF-VFDU03 (optional)
Panasonic CD drive:CF-VDRRT1 (optional)
*2
This is not displayed when [LAN] is set to [Disable] or [Boot up from LAN] is set to [Disable] on
[Advanced] menu.
The default order is as follows:
[Floppy Drive] -> [Hard Disk Drive] -> [USB CD Drive] -> [LAN].
To move a device up by one in the order, select the device with
To move a device down by one in the order, select the device with
F5 .
NOTE
[Boot] menu cannot be changed when the Setup Utility is started up with the User
Password.
Boot Menu
The device for starting up the operating system can also be selected during computer
start-up. After the computer is turned on, and Esc is pressed at [Panasonic] boot
screen, [Boot Menu] (the device selection display) will appear. When the setting of
[Boot] menu is changed, the selection screen display will also change. [Boot Menu] is
displayed only when [Boot First Menu] in [Security] menu is set to [Enable].
94
, and then press F6 .
and
and , and then press