Parameters For The Serial Interface - KERN EG 220-3NM Operating Instruction

7.2.2 Parameters for the serial interface

(excl. EWB models)
Function
Output format at inter-
face
Output condition at
interface
(Menu setting "7 I.F. [1] or
[2]" only )
Baud rate
Parity
(Menu setting
"7 I.F. 2" only )
50
Display Choice
7 I.F. 0
☆ 1
2
o.c. 0
71.
1
2
3
4
5
6
☆ 7
72. b.L. ☆ 1
2
3
4
73. PA. ☆ 0
1
2
Description of the choice pos-
sibilities
Interface not active
6-digit data format
7-digit data format
No data issued.
Continuous serial output.
Continuous serial output upon
stabilised display.
Output following printing of
PRINT/M.
Automatic output upon stable
weighing value. The first value to
stabilise is adopted if this is -0.00
or less. No new output until weight
is removed and a new load ap-
plied.
Output upon stabilisation, no out-
put if data unstable.
Output upon stabilisation, con-
stant output if data unstable.
Output following printing of
PRINT/M.
1200 bps
2400 bps
4800 bps
9600 bps
No parity bit
Uneven parity
Even parity
EW/EG-N/EWB-e-1627