Functions; Access And Changing Of Numerous Functions - KERN EG 220-3NM Operating Instruction

7 Functions

7.1 Access and changing of numerous functions:

The balance has been set to a certain standard configuration in the factory. This con-
figuration is marked by a
The configuration can be changed as follows:
Operation
1. Access to the functions.
Switch on the balance:
Press the key for about 4 seconds
until [FUNC] appears:
When released the following will appear :
(possible configurations are listed in
chap. 7.2.2).
2. Changing the functions
Run through the various functions for
configuration by continuing to press the
key.
Operate the key in order to change
the last position in the parameter.
Store the chosen function by operating
the key.
You will now leave the function menu
and return to weighing mode.
46
☆ .
Display
ο
0 I I I F
0.000
Func
1 b.G. 1
2.SEL 0
2.SEL 1
ο
0 I I I F
0.000
EW/EG-N/EWB-e-1627
g
g