Underfloor Weighing - KERN EG 220-3NM Operating Instruction

6.2.1.1 Underfloor weighing

Objects which, because of their size or shape, cannot be put on the scale, can be
weighed by means of underfloor weighing.
Proceed as follows:
•
Switch off the balance.
•
Turn the balance over.
•
Open the cover plate (1) on the base of the balance.
•
Hang on the hanging loop (optional) completely for underfloor weighing.
•
Place the balance over an opening.
•
Hang the item to be weighed on the hanging loop and carry out weighing.
Take care that the hooks used for the underfloor weighing are stable enough to hold
the goods which you wish to weigh (risk of breakage).
Always make sure that there are no living beings or materials below the load that
could be injured or damaged.
After completing the underfloor weighing, the opening in the floor of the balance
must be closed again (dust protection).
EW/EG-N/EWB-e-1627
1
!
!
CAUTION
NOTE
31