Table of Contents
Advertisement
4079-00X
Installation Notes: When you install the carriage card, first make
sure the card is seated in the front of the card holder (1), then rotate
the card backward until it locks in place behind the guides (2), only
one of which is shown.
When replacing the printhead cover:
1. Use the drive belt to move the carriage to the end away from the
purge unit.
2. Use the lower hook to attach the cover. Align the slots and tabs
on each side of the cover, and watch the position of the green
printhead position lever.
Repair Information
4-14
Advertisement
Table of Contents
