Controlling The Cgw-I - ITS Telecom CGW-I Installation And Operation Manual

Field
Beep in the last

Controlling the CGW-I

The System menu includes a number of options for resetting, clearing and
closing your CGW-I device. To choose one of these options, select: System
Control. The options are described below:
Function
Reset Device
Reset GSM Channel
Reset ISDN Interface
Cellular Daily Restart
Gentle Closing
Echo Parameters
Back to Factory
Defaults
CGW-I Cellular Gateway BRI-GSM : Installation and Operation Manual
Parameter
The number of minutes before your Prepaid Time credit is
finished that the system will begin beeping (once each
minute) to alert you that a SIM's discounted time is almost
finished.
Range: 0-99
Description
Performs a reset on your device if it stops responding. When
your device is reset, all temporary data is lost (i.e., counters
and MSN Routing Links).
Resets the engine of the selected channel (1 or 2) if channel
stops responding.
Resets communications protocol between device and ISDN
layers 1, 2, and 3.
Allows you to set a time for a daily cellular engine restart to
be performed automatically by the unit for each of the two
channels.
Prevents any new connections to be made on any channel.
Any current connection will remain open until the call is
ended. After doing a gentle close, you must select Reset
Device to use it again.
Echo parameters influences on the audio quality. This
parameter changes the system hardware's interactivity with
the firmware. Echo Parameter argument can be 0 , 1 and 2,
where
[0] Supports with the Cellular Module Q24CL001/002 &
Q2686
[1] Supports with the Cellular Module Q24CL002 &
Q2686
[2] Support with the Cellular Module Q2686 Only
Note: 'Echo Parameters' can be changed by the qualified
technical person only. Changing 'Echo Parameters' takes
effect on the Cellular Gateway functionality.
Resets all parameters to their default settings.
41