Setting A Password - ITS Telecom CGW-I Installation And Operation Manual

the first time you make a connection to a specific CGW-I device before you can upload
parameters to it.
A gray bar will show the sending progress, followed by a message indicating
whether the action was successful or not.

Setting a Password

A password must be filled in before reading or sending parameters.
To change the administrator's password:
1. Enter the Current Password.
Note:
Password is not case sensitive. Entry is shown in asterisks (******).
2. Enter the New Password for the connected CGW-I. The password
can be up to 16 characters.
3. Re-enter the new password for confirmation. A message will
appear indicating if the Password has been changed successfully
or not.
CGW-I Cellular Gateway BRI-GSM : Installation and Operation Manual
26