Table of Contents
Advertisement
■ How to Use the Camera
● LANGUAGE : You can select the menu language according to your
requirements.
● RETURN : Select this to save the SPECIAL menu settings and return
to the MAIN SETUP menu.
EXIT
Select a desired EXIT mode using the Left and Right buttons depending on
the camera purpose.
- SAVE : Save the current settings and exit the MAIN SETUP menu.
- NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.
- RESET : Resets the camera settings to the factory defaults. Language and
Monitor settings are not initialized.
Ultra High Resolution Digital Day/Night Vandal Resistant Dome Camera
30
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an
authorized technician.
Problem
• Check the power connections.
Nothing appears on
the screen.
• Check the VIDEO signal line connection.
• Make sure the lens is clean. Clean the lens with
The image on the
a soft clean lint free cloth.
screen is dim.
• Adjust the monitor contrast & brightness controls.
• Re-position the camera if necessary.
• Adjust the contrast control of the monitor.
The image on the
• If you have an intermediate device, set the 75Ω/
screen is dark.
Hi-z properly.
The camera is not working
• Check that an appropriate power source is
properly, and the surface
connected to the camera.
of the camera is hot.
The DAY/NIGHT menu
• Check that AGC in the EXPOSURE menu is set
does not work.
to 'OFF'.
• Check that AGC in the EXPOSURE menu is not
The SENS-UP function
set to 'OFF'.
does not work.
• Check that SHUTTER in the EXPOSURE menu
is not set to 'A.FLK' or 'MANUAL'.
31
Ultra High Resolution Digital Day/Night Vandal Resistant Dome Camera
Troubleshooting ■
Solution
Advertisement
Table of Contents
