Troubleshooting - Genie CCTV TD-D62 User Manual

Day & night indoor dome camera
Table of Contents

Advertisement

Troubleshooting

If you have trouble setting up or operating the camera, refer to the following.
NO PICTURE
• Check if the Power is correctly connected.
• Check if all the cables are correctly connected.
CAMERA IS HOT, ABNORMAL MOVING BLACK LINES ON THE SCREEN.
• Check the camera power supply meets the necessary requirements and the mains
power supply does not have different ground potentials.
BLINKING SCREEN
• Check if the camera is facing toward bright sunshine or fluorescent lighting.
• Check if the Auto Iris Lens is correctly connected.
UNCLEAR SCREEN
• Check if the lens is dirty. Clean with a soft lint free cloth.
NO OPERATION OF COLOUR AUTO MODE
• Check the camera is set to 'Color' mode.
• Check that 'GAIN' mode is not set to off.
NO OPERATION OF MOTION DETECTION
• Check that 'Motion Detection' mode is not set to off.
• Check that 'Area' is properly configured.
NOT THE RIGHT COLOURS
• Check the 'White Balance' setting is correct.
INDOOR DOME CAMERA
016
Specification (With IR)
MODEL
INDOOR DOME CAMERA (WITH IR)
Model
VIDEO
Image Sensor
1/3" Sony Super HAD II CCD
Total Pixels
NTSC: 811 (H) X 508 (V), PAL : 795 (H) X 596 (V)
Effective Pixels
NTSC: 768 (H) X 494 (V), PAL : 752 (H) X 582 (V)
Scanning System
2:1 Interlace
Scanning Frequency
NTSC: 15.734kHz x 59.94Hz, PAL : 15.625kHz x 50Hz
Synchronisation
Internal
Shutter Speed
NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/100,000s
Horizontal Resolution
600TVL (Colour) / 650TVL (B/W)
S/N Ratio
50 dB or more (AGC off )
Min. Illumination
Colour: 0.1 Lux, B/W: 0.01 Lux , (F1.2 at 30 IRE)
Video Output
VBS 1.0V p-p /75Ω
LENS
Lens
[2.8~12mm] DC Auto Iris Lens (Option: IR Filter Change)
Angular Field of View
H: 102° (Wide) ~ 28° (Tele), V: 73° (Wide) ~ 21° (Tele)
Iris Control
Auto / Manual
OPERATIONAL
On Screen Display
Support
Day & Night
Colour / BW / Auto Selectable
Motion Detection
On / Off (4 Zone ISO Control/ Output OSD)
Privacy Masking
On / Off (8 Areas)
White Balance
ATW1, ATW2/AWC->SET/MANUAL
DNR
On / Off
WDR
DWDR
Sens-Up
N/A
Auto Gain Control
OFF / LOW / MIDDLE / HIGH Selectable
DPC
On / Off
Sharpness
Level Adjustable
Heater
Option
ENVIRONMENTAL
Operating Temp. / Storage Temp.
-10°C~+50°C / -20°C~+60°C
Operation Humidity
Under 90% (Non-condensing)
ELECTRICAL
DC Type
Max. DC12V 460mA [5.5W]
Power
DC12V 500mA
Power Supply
Dual Type
Power
Max. DC12V 540mA [6.5W]
Max. AC24V 420mA [11W]
DC12V 1.0A
Power Supply
MECHANICAL
AC24V 1.0A
MECHANICAL
Dimensions
122.5mm (W) x 111.3mm (H) x 122.5mm (D)
Weight
350g
IR LED
40EA
Ingress Protection
-
Certifications
CE, FCC
Outside Control
-
INDOOR DOME CAMERA
017

Advertisement

Table of Contents
loading

Table of Contents