CyberData 011049 Operation Manual page 81

Note
Note
8.
Web Page Item
Current Firmware Version
Operations Guide
Do not reboot the device after clicking on the Upload button.
This starts the upgrade process. Once the SIP Call Button has uploaded the file, the
Uploading Firmware countdown page appears, indicating that the firmware is being written
to flash. The SIP Call Button will automatically reboot when the upload is complete. When
the countdown finishes, the Firmware page will refresh. The uploaded firmware filename
should be displayed in the system configuration (indicating a successful upload and reboot).
Table 2-23 shows the web page items on the Firmware page.
Table 2-23. Firmware Parameters
Description
Shows the current firmware version.
Use the Browse button to navigate to the location of the
Intercom firmware file that you want to upload.
Click on the Upload button to automatically upload the selected
firmware and reboot the system.
930801F
Installing the SIP Call Button
SIP Call Button Setup
CyberData Corporation
73