Configure The Audio Configuration Parameters - CyberData 011049 Operation Manual

2.3.9 Configure the Audio Configuration Parameters

The Audio Configuration page is used to add custom audio to the board. User uploaded audio will
take precedence over the audio files shipped with the Call Button.
1. Click Audio Config to open the Audio Configuration page
2. On the Audiofiles page, enter values for the parameters indicated in
Note
Web Page Item
Available Space
Page tone
Intrusion Sensor Triggered
Door Ajar
Operations Guide
Figure 2-20. Audio Configuration Page
The question mark icon (
after the Toggle Help button is pressed
Table 2-17. Audiofiles Configuration Parameters
Description
Shows the space available for the user to save custom audio files if they want to change the
message when the door or sensor is triggered.
Corresponds to a simple tone used for beep on initialization and beep on page (24 character
limit).
Corresponds to the message "Intrusion Sensor Triggered" (24 character limit).
Corresponds to the message "Door Ajar" (24 character limit).
Click on the Browse button to navigate to and select an audio file.
The Play button will play that audio file.
930801F
) in the following table shows which web page items will be defined
.
Installing the SIP Call Button
SIP Call Button Setup
(Figure 2-20).
Table 2-17.
CyberData Corporation
44