CyberData 011049 Operation Manual page 80

2.4 Upgrade the Firmware and Reboot the SIP Call
Button
GENERAL ALERT
To upload the firmware from your computer:
1. Retrieve the latest SIP Call Button firmware file from the SIP Call Button Downloads page at:
2. Unzip the firmware version file. This file may contain the following:
•
•
3. Log in to the SIP Call Button home page as instructed in
4. Click on the Firmware menu button to open the Firmware page. See
5. Click on the Browse button, and then navigate to the location of the firmware file.
6. Select the firmware file.
7. Click on the Upload button.
Operations Guide
Caution
Equipment Hazard: Devices with a serial number that begins with 0491xxxxx can
only run firmware versions 10.0.0 or later.
http://www.cyberdata.net/products/voip/digitalanalog/callbutton/downloads.html
Firmware file
Release notes
Configuration Home Page".
Caution
Equipment Hazard: CyberData strongly recommends that you first reboot the
device before attempting to upgrade the firmware of the device. See
"Reboot the
GENERAL ALERT
Figure 2-30. Firmware Page
Device".
930801F
Installing the SIP Call Button
SIP Call Button Setup
Section 2.3.4, "Log in to the
Figure 2-30.
Section 2.4.1,
CyberData Corporation
72