Storage - Silvercrest SFM 850 A2 Operating Instructions Manual

■ Clean the appliance lid in warm water using a mild detergent. Rinse the ap-
pliance lid off with clear water. Dry the appliance lid well and then place it
upright on its side so that any excess water still inside the lid can drain away.
Be aware that the lid must be completely dry before re-use!
■ Clean the permanent metal filter
then rinse it with clear water.
4) Dry all parts well before assembly.
5) Replace the permanent metal filter
cover over the permanent metal filter
6) Replace the lid on the appliance so that the hinges grip into the hinge supports
on the rear side of the appliance and sit firmly in place.
NOTE
Any other servicing should be performed by an authorized service representative
or Customer Service.

Storage

1) Lift or carry the appliance using the side handles
2) Wrap the power cable around the cable retainer
pliance. Push one of the pins of the mains plug into one of the holes on the
cable retainer
3) The handle
in the frying basket
fryer.
4) Store the appliance with the appliance lid closed. This will keep the inside of
the deep fat fryer clean and free of dust.
SFM 850 A2
in warm water with a little detergent,
to hold the mains plug in place:
of the frying basket
so that frying basket
in the cavity in the device lid and close
.
on the housing.
on the rear of the ap-
can be removed for storage and laid
can be placed in the deep fat
GB │ IE │ NI │ 17 ■