Table of Contents
Advertisement
Maintenance
daily inSpection (every 10 hourS)
Pressurizing the hydraulic tank
1. Start the engine and run it at low speed.
2. With the vent plug (2) removed, set the
safety lock levers to the released position.
· Hydraulic tank pressurization posture
3. Fully extend the bucket, arm, boom, swing
and span cylinders.
4. Stop the engine and raise the left safety
lock lever to engage the lock.
5. Tighten the vent plug (2), and then
pressurize by retracting the cylinders.
5-22
Advertisement
Table of Contents
Need help?
Do you have a question about the TB216 and is the answer not in the manual?
Questions and answers
where do I find out how to attach an auger to the tb216 excavator? What hose sizes, couplers, where to attach the hoses, what type of ends, do I have to add oil, how to keep air out of the lines